What is the E-Cat?

E-Cat stands for “Energy Catalyzer” and is an invention considered by many to be one of the most important technological developments of of our age. It is an energy production device invented by Italian-American inventor Andrea Rossi who has been developing of the course of over two decades, and has now come to a point where he is ready to make a formal introduction of a recent version of the E-Cat in a video conference that will be video streamed worldwide on November 24 2017 on his company’s website Ecat.com starting at 12 noon US Eastern Time.

How Does the E-Cat Work?

While there is considerable secrecy surrounding the exact technical specifications of the E-Cat, patent disclosures state that powdered nickel metal, lithium and lithium aluminum hydride (LaAlH4) are combined to produce large amounts of heat, far in excess of possible chemical reactions, through a currently little understood low energy nuclear reaction (LENR) process inside a reaction chamber.

In this process, when an external energy source is applied to the E-Cat device, large amounts of thermal energy (heat) are produced, much more than the energy input into the device. The exact nature of the energetic stimulation that Rossi applies to his E-Cat devices in order to “catalyze” the energy output is a closely kept trade secret.

Potential uses

The energy produced by the LENR reaction of the E-Cat (which Andrea Rossi calls the “Rossi Effect”) is in the form of heat which can be used for any number of purposes, including the production of steam, which is the principle way that most electricity is generated at power stations today, whether fossil fuel or nuclear.

The significance of the E-Cat as an energy source is that it can produce energy at a much cheaper rate and much more cleanly than other sources on the market. The major ingredients, nickel, lithium and hydrogen are common elements and readily available at low cost, and inside the E-Cat are consumed in very small quantities. There is no release of CO2 or other greenhouse gases from the E-Cat from fuel combustion. Unlike traditional nuclear fission power, no radioactive materials are involved, and no radioactive waste is produced.

There have been numerous tests of the E-Cat reported over the years. In an October 6th test in Bologna, Italy, the E-Cat ran without external heat (referred to as ‘self-sustain mode’) for almost four hours, maintaining a constant temperature and boiling water continuously. In third party testing of the E-Cat, radiation detectors have found no radiation emitted by the device above background levels.

Andrea Rossi launched the first commercial E-Cat plant, a 1 MW thermal power plant in Bologna, Italy on October 28th, 2011 which was tested and certified as being acceptable by an agent for an unknown customer. Rossi stated that the customer is a military entity that does not want to be identified.

Below is a photograph of an early E-Cat units (sometimes referred to as ‘hot cats). Andrea Rossi recently provided the dimension of this reactor: “the diameter of the internal cylinder is 30 mm, the diameter of the external cylinder is 90 mm, the length of both is 330 mm.”

In May 2013, Italian blogger Daniele Passerini released a photograph (without Andrea Rossi’s approval) of an early Hot Cat reactor that was being tested to its maximum performance. Andrea Rossi explained in an interview on May 7, 2013 that this picture, although unauthorized, showed a Hot Cat reactor in self-sustain mode being allowed to run away — i.e. the reaction was uncontrolled.

Hot Cat on Fire

On May 16th, 2013 a report was published by a group of European academics who were given access to a hot cat reactor over a period of about five months to test. The conclusion of the group was that the E-Cat provided energy in amounts far greater than would be possible from any chemical reaction. The report can be read here. More tests are scheduled to be done, including a 180 day test which will apparently be started this summer.

So far, Rossi has maintained that the only validation that really matters is from satisfied customers who own working E-Cats. Only when E-Cats are readily available will the forgoing information be able to be fully confirmed.

Industrial Heat, LLC Acquired the Rights to the E-Cat

On January 24, 2014, Industrial Heat LLC issued a press release announcing that they had acquired intellectual property and licensing rights to Andrea Rossi’s E-Cat technology. Tom Darden, co-founder of Cherokee Investment Partners was mentioned as one of the investors behind Industrial Heat. The press release said that Industrial Heat has validated E-Cat technology by inspecting the E-Cat during performance tests, and having an independent expert certify its performance. Industrial Heat plans to embark on an industrialization effort to make the E-Cat’s use widespread, and has reached out to companies, universities and NGOs, inviting them to participate in partnerships to help develop the E-Cat. Andrea Rossi has stated recently that ultimate ownership of the E-Cat’s intellectual property still resides with Leonardo Corporation, of which he is CEO.

Third Party Test, October 2014 (The Lugano Report)

In October 2014, the team of researchers which had conducted the testing in 2013, released a new report about testing of an E-Cat reactor they had operated during a 31-day experiment during February and March, 2014 in Lugano, Switzerland. The team reported that the reactor produced over twice as much energy as was fed into it, and that during the testing analysis showed that isotopic makeup of elements used in the fuel changed significantly. See here for more information on this test.

Industrial Plant Under Test at Customer Site (2014-2015)

rossiinplant
Andrea Rossi inspects his 1MW E-Cat Plant, 2014 (photo courtesy www.andrea-rossi.com)

Starting in late 2014, Andrea Rossi reported that he was performing a long-term test of an industrial-grade 1MW E-Cat plant in Doral, Florida that was providing heat in the form of steam. At the end of the test, a report was written by Ing. Fabio Penon who certified that during the test the E-Cat plant ran at an average COP of around 80 (meaning 80 times more energy was produced than consumed during the test)

Patent Awarded by the US Patent Office

On August 25, 2015 the US Patent and Trademark Office awarded Rossi a patent for his invention called in the application a ‘Fluid Heater’. The full text of the patent can be found here:

https://animpossibleinvention.files.wordpress.com/2015/08/us9115913b1.pdf

Year-long Test of the E-Cat Concludes, Lawsuit Against Industrial Heat.

On February 27, 2016 Andrea Rossi announced that the year-long test of the 1MW E-Cat plant was finished. On April 6, 2016 Rossi’s Leonardo Corporation issued a press release announcing that the E-Cat plant “generated energy at a rate in excess of six (6) times the amount of energy consumed by the plant, often generating energy exceeding fifty (50) times the amount of energy consumed during the same period.” In the same press release, Leonardo announced that it was suing Industrial Heat, LLC for breach of licensing agreement and for misappropriating Leonardo Corporations intellectual property. In subsequent court filings, Leonardo Corp. claimed that Industrial Heat refused to pay an agreed-upon $89 million at the conclusion of the test. Industrial Heat responded by claiming that Andrea Rossi and Leonardo Corp. breached conditions of the licensing agreement, and was engaged in fraudulent activity. Hundreds of legal documents were produced in the course of the lawsuit going forward which have been archived here.

Settlement of Lawsuit

After over a year of litigation and preparation for trial, on July 5, 2017, just as a jurors were getting ready to hear opening arguments in a Miami court, the two parties reached a settlement in the case. A document produced subsequently provided the terms of the settlement, which basically was that Andrea Rossi’s Leonardo Corporation was given back all rights to the E-Cat technology, and the partnership between Leonardo and Industrial heat was ended.

E-Cat QX

During the period that Andrea Rossi ran the year-long test in Doral, he developed a new version of the E-Cat that he has named the E-Cat QX. It is a small E-Cat reactor (reported to be rated at 20 W) which Rossi has built to be combined in clusters to create energy plants of variable size.

Presentation of the E-Cat QX

Andrea Rossi has announced that a presentation of his latest version of the E-Cat, which is currently known as the E-Cat QX, will be made on November 24, 2017. The event will be presented to an audience of invited guests, and will also be filmed and broadcast to a worldwide audience. Full details of this event have not yet been made public, but we will make further information available on E-Cat World as soon as we can.

Important announcements and links connected with this test will be posted on this page: www.e-catworld.com/demo

More information about the E-Cat can be found at out companion website www.e-catworld.com